How to Fix a Moen Shower Faucet

As a worldwide distributor of fixtures and faucets,eliminate all the excess water in the pipes before you
Moen had successfully created a brand name manyhave closed the valve.
other companies dreamed of. You might also be using2. After that, find the star-shaped apertures in the
Moen products in your bathrooms already. Whatvery bottom of your showerhead. Then, turn each
makes Moen shower faucets different from otherof them to loosen its grip. You may use your own
products? Well, they had successfully perfected thehex key to simplify this work. Do the unscrewing until
use of cartridges in the bathroom faucets. Thisthe base can now be wiggled out of place. If it is
cartridge enables the faucet to easily stop the waternow loose, remove the whole base, and you should
flow without making leaks and to detect thesee the pipe system within your wall, and with it, is
difference between the stainless steel pipes used forthe cartridge.
the hot and cold water. Having this newly invented3. In case you can see leaks from the bolts in the
technology proves the quality of Moen products.pipes, simply tighten the nuts using your wrench. If
However, this cartridge is not exempted from thethe actual tubing is causing the leak, use sealants to
disastrous effects of wear and tear. As years passfinally close the unnecessary flows.
by, they can gather rust from the constant exposure4. With an adjustable wrench, clasp the metal
to moisture. If that is the case in your Moen showercartridge. Then, gradually twist it counterclockwise to
faucet, you may need replacement. How can you doeventually remove it from its place.
that? Actually, you don't have to call your plumber5. Grip your replacement cartridge using the same
and spend bucks for the replacement procedure.wrench and set it in place. Twist it into the locked
All you have to do is to consider the following simpleposition, and this time, in the clockwise direction.
steps. Remember, though, that you might see bugsWhen you heard a clicking sound, the cartridge is
or rots in the piping as you open the base. If younow in place.
would choose to spray some insect killer in the walls,6. To finish, mount the base back to its original place
wear safety masks to protect your lungs.and screw it securely.
1. First of all, stop the flow of water by turning yourYou may now check if your shower faucet is in its
main water valve to point into the 'Off' label. Youcorrect status. Reopen your main water valve and
may find this valve under the sink, with someevaluate the flow. Are there any leaks in the base?
polished brass pipes connected to it. If doing itIs the water freely flowing from the showerhead, or
manually is tedious, you may use your other simpledoes it seem that something is blocking its way? If
tools. Then, turn the shower's handle into its openeverything is OK, then congratulate yourself for a
status and keep it this way for a while. This willsuccessful job.