| If your company produces large metal products, you | | | | unit’s spray wand makes it possible for the user |
| know first-hand the importance of a quality paint | | | | to clean into corners and problem areas to ensure a |
| finish. To acquire great paint adhesion and the best | | | | fully cleaned phosphated metal surface. |
| finish possible you must have a properly prepared | | | | The CPR System provides a no flash rust guarantee |
| surface before your painting process begins. To | | | | for 14-days at 50 percent humidity. The one step |
| achieve this, many metal fabricators use time | | | | cleaning and phosphate process leaves a phosphate |
| consuming, labor intensive, expensive and | | | | coating on the metal surface. The phosphate coating |
| environmentally non-compliant methods. There is a | | | | acts as an additional bonding agent and corrosion |
| metal pretreatment system available that will not only | | | | inhibitor. In addition, high-pressure spray wand |
| clean and degrease your metal products in one step | | | | phosphating will increase salt spray test times. |
| but will also apply a phosphate coating on the metal | | | | CPR Systems is the leader in high-pressure spray |
| substrate. The CPR System will recycle the wash | | | | wand phosphating with recycling. The CPR system |
| water bath reclaiming the chemical phosphate for | | | | provides the cleaning power of a 5-stage washer in |
| future use. | | | | one step. Designed for large metal products, the high |
| The CPR System utilizes a high-pressure, Bondtite | | | | pressure, cleaning, phosphating method with |
| pressure washer that produces spray wand washing | | | | closed-looped recycling is the definition of a lean |
| pressures of up to 4,000 PSI and water | | | | manufacturing technology. |
| temperatures of 180 degrees. The Bondite cleaning | | | | |