CPR Systems Goes Green With Wash Water Recycling Feature In High Pressure Spray Wand Phosphating

ner Phosphoric Recycling Systems (CPR Systems™)cleaner, phosphate, PhosBite 101, the CPR
is the leader in high-pressure spray wand phosphatingSystem™ will quickly remove oil and dirt from large
with recycling. Since its inception in 1975, T. Georgemetal products. High-pressure impingement of the
Podell & Co, Inc owner and developer of CPRphosphate solution creates an iron phosphate coating
Systems™ has developed into a diverse corporationon the steel to deter flash rusting, improve paint
supplying specialized cleaning equipment and servicesadhesion and increase salt spray test times. A CPR
to manufacturers across North America. CPRSystem™ recycles the wash water and reclaims
Systems’™ ability to provide turnkeythe cleaner eliminating monitoring and record keeping
installations enables them to deliver on its promises.of industrial wastewater discharge. By reclaiming the
Quality, know-how and dependability, they put it allwash water bath and recycling the phosphoric cleaner
together.degreaser a CPR System™ reduces chemical and
The CPR System™ provides cleaning, phosphatingwater consumption by 80% over typical wash water
and recycling in one system for manufacturers ofdischarge methods.
large metal products as a means of pretreatmentMost people think environmental compliance is
before paint. The chemical bath from the highexpensive, and most of the time it is. There are a
pressure wash water including the chemical cleaner isfew exceptions and the CPR System™ is one of
collected and recycled for continuous use. Designedthem. The CPR System™ eliminates solvent wiping
for large metal products, its high pressure, cleaningthus greatly reducing VOC emissions, labor, rag
and phosphating method is the definition of a leandisposal and solvent usage. If you are currently
manufacturing technology. The CPR System™ isdischarging, evaporating or having your wash water
environmental compliant, easy to use and operateshauled off for disposal, a CPR System™ will
on a low energy, chemical, and water consumptioneliminate discharge permits, reduce water
platform.consumption and chemical usage. Due to a drastic
When it is time to clean and phosphate your largereduction in chemical cost, many companies have
metal parts prior to paint, the operator switches onseen an immediate decrease to their production cost!
the high pressure Bondtite phosphating washer unit.Every CPR System™ is customized to fit the needs
Pulling the wand trigger energizes the high-pressureof its customers. Whether it’s a new cleaning
circuit, which automatically ignites the gas burner,bay, a new wash pad, or a conversion from your
heating only the water that is used for an efficientexisting system, CPR System™ is a fully qualified
on demand operation. The heated and pressurizedconstruction contractor, ready to install a closed-loop
chemical cleaner / phosphate solution is then sprayedCPR System™ to meet your specific needs.
on the work piece with a 25-degree fan nozzle heldEquipment installation usually takes one day, with
4 to 6 inches away. Spraying with overlappingstart-up, testing and training completed on the
side-to-side motions, the part is cleaned andsecond day. Not limited by large part size, weight or
phosphate in 1 step. Clean water rinsing is optional.production rate. The CPR System™ can be
The parts are then dried and sent for coating.mounted on a platform to save premium floor space
Using high pressure phosphate up to 4,000 psi at 180or located in another area of your plant.
degrees the conversion is fast. With its one step