Installing A Skylight

A skylight can be an excellent feature in any home. Itcut the battens and then the rafters as required.
is a wonderful solution to improving the lightingFinally saw the hole in the plasterboard.
situation in a dark, drab room. This kind of project willBeware of any electrical cabling which may be running
take some careful planning, however, to ensure thatthrough your work area.
it is the right solution for your home.Place your skylight into position and fix it to the
Once you have decided that this is what you wouldframing. Check that the skylight is level at both the
like to do, you will need to decide on the size andupper and lower sides of the frame.
positioning of your skylight. There are many stylesDepending on your particular style of skylight you will
possible; tubular, round dome, square dome,now need to install the flashings. This is an important
segmented pyramid, modular pyramid. It is importantpart of the job because; if these are installed
that you consider carefully how this is going to affectincorrectly you will experience leaking. Flashing can be
the design and look of your home.moulded into place using a soft wooden block to
If you are purchasing a pre-made skylight, follow thegently beat the metal into the shape of the tiles.
instructions from the manufacturer carefully.Once flashings are in place, replace the tiles. This may
Remember that you are about to put a hole in yourinvolve cutting the tiles. Once this is done you are
roof, so be prepared for any unforseenfinished with the outside part of the job.
circumstances. Have a tarpaulin and some rope onNow you will need to fit plaster board into the rebate
hand, just in case you are held up for any reason.between the skylight and the ceiling. Measure your
Mark the position of the skylight from the inside,plasterboard carefully and nail it into place. Once this is
ensuring that it fits alongside the existing ceiling joists.done apply joining cement for an even finish. Metal
Now get up on the roof, taking all your tools andangles can help strengthen joins and give a straight
equipment with you. You do not want to wasteline to work with. Once you have finished your
valuable time going back and forward fetchingplastering sand, dry and paint for a neat finish on the
forgotten tools.inside of your new skylight.
Locate the position of your skylight and beginYour new skylight will bring natural light and a feeling
removing tiles. When you are sure of your position,of warmth to your home.